The FC connector is a fiber-optic connector with a threaded body, which was designed for use in high-vibration environments. It is commonly used with both single-mode optical fiber and polarization-maintaining optical fiber.

SC to SC Fiber Optic Cable Extension Coupler is special designed for pre-terminated single-mode fiber optic cable connecting to reach long distance Ethernet extension via fiber optic connection with SC to SC simplex connector easy plug and play design.

These adapters can be used to provide a connection between two SC duplex fiber cables and are compliant with international standards, making them compatible within a wide range of fiber optic applications.

CLT (Central Loose Tube)/ GYXTW Optical Fiber Cables. CLT/ GYXTW Optical Fiber Cables Are Solution For High-Performance Aerial Environments Including Power Transmission And Distribution For Networks, Robust Construction Reduces Installation Costs, By Avoiding The Need For Expensive Cable Shielding And Grounding.

It is designed for high quality and high efficiency for installation; the structure of the crimping position is a unique design; and does not need gluing, polishing neither any consumables. Adopting fiber pre-installed structure, and convenient for field installation.

OS1 OS2 LC to LC(Female to Female) Duplex Fiber Optic Adapter/Coupler with M2*6MM Screw. LC adapters uses ceramic sleeve to connect between two LC fiber Optic cables. Adapters can lock the connectors and get low insertion loss to transmission optical signal. O...

OS1 OS2 LC to LC(Female to Female) Duplex Fiber Optic Adapter/Coupler with M2*6MM Screw.
LC adapters uses ceramic sleeve to connect between two LC fiber Optic cables.
Adapters can lock the connectors and get low insertion loss to transmission optical signal.
Our LC fiber optic adapter are suitable for fiber patch panel, which means you can use them in any type of enclosure with rectangular cutouts.

Single Mode LC 3dB Fiber Optic Attenuator, LC/UPC in-Line Fiber Attenuator, Male to Female, Single-mode Fixed,

FC-FC fiber patch cord
A patch cord is a fiber optic cable used to attach one device to another for signal routing.
FC stands for Fixed Connection. It is fixed by way of a threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.

FC/UPC Female to SC/UPC Female Hybrid Simplex Single Mode/Multimode Copper Fiber Optic Adapter/Coupler with Flange

The SC/UPC fast connectors are used to close optical cables and fast cross-connection, cable repair, various switching nodes in FTTH networks to form a continuous optical patch. They completely eliminate the need for hand polishing in the field.

The SC to SC patch cord is pre-terminated with the SC UPC fiber optic connectors on both sides of the patch cable. The Ultra Physical Contact (UPC) SC fiber optic connector provides a more polished end surface finish to minimize the optical loss in the network connection.

Fiber Cable 2 Core with Three Steel Wire Single Mode Fiber Optic Cable High Quality Gpon Epon Media Convertor All in One Device Support Fiber Optic Cable With 2 Steel Wire Support Single Mode Fiber

This coupler consists of a SC simplex female on one end and a SC simplex female on the other end. It is typically used to connect two SC simplex male APC polished cable assemblies.

Our range of Starlight™ LC to LC fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for exceptionally fast data applications. These LC - LC FIbre leads are available in multimode OM1 (62.5/125), OM2 (50/125), OM3 (50/125) and OM4 (50/125)

A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light s...

A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines.

By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. FS supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapters.

≤0.5dB(Typical) Low Insertion Loss
Zirconia Ceramic Sleeve with High-precision Alignment
Protective Dust Cap Keeps Adapter’s Interior Clean from Dust
Stainless Steel Clips for Tool-less Snap-in Installation
Available in A Variety of Connector Types

Made of 1/2/4colored optical fiber and 2 FPR (steel wire), with excellent tensile strength and side pressure resistance to protect optical fiber

The single-mode patch cord ULTIMODE PC-522S2 is a section of fiber optic cable with a length of 3 meter, terminated on both ends with SC/APC connectors. The patch cord is terminated on both ends with SC/APC connectors.

LC fiber patch cord: A connector that connects to an SFP module. It is made with a convenient modular jack (RJ) latch mechanism. ( used by routers) 2.SC fiber patch cord: The connector that connects the GBIC optical module.

The 50/125μm OM3 multimode bend insensitive fiber optic cable has less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It can save mor...

The 50/125μm OM3 multimode bend insensitive fiber optic cable has less attenuation when bent or twisted compared with traditional optical fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It can save more space for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, etc. and interconnect pre-terminated cassettes in main distribution, horizontal distribution, and equipment distribution areas.