Wall Mount ODF is designed to manage fiber splices and patching of fiber links with ease of maintenance for installers. This wall mount optical fiber distribution includes double door access and keyed entry. It is suited to patching cables in controlled environments and offers efficient storing excess fibers.

Compatible TAA Compliant 10GBase-CU QSFP+ to 1xSFP+ Direct Attach Cable (Passive, 3m)

GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm,

Model: V1600G0-B
Spec: 4*GPON,2GE(RJ45)+2*10GE(SFP+) Dual power modules available in DC/AC
Net Weight: 2.95kg / Gross Weight: 4.15kg

HG8245Q2 GPON ONU - terminal for GPON network Huawei HG8245Q2 is an ONT terminal designed for GPON networks. It is equipped with 4 gigabit Ethernet ports, 2 USB ports and 1 RJ11 (POTS) phone port. The device enables wireless network transmission thanks to IEEE...

HG8245Q2 GPON ONU - terminal for GPON network
Huawei HG8245Q2 is an ONT terminal designed for GPON networks. It is equipped with 4 gigabit Ethernet ports, 2 USB ports and 1 RJ11 (POTS) phone port. The device enables wireless network transmission thanks to IEEE 802.11ac standard and 3 x 3 MIMO technology. It works simultaneously at two frequencies, 450 Mbit/s at 2.4 GHz and 1300 Mbit/s at 5 GHz. The HG8245Q2 terminal is an ideal solution for home (HGU - Home Gateway Unit) for FTTH scenarios. To easily create a intelligent home network, the gateway supports Layer 3 functionality. It provides users with Triple-play service (Internet, VoIP telephony, IPTV). The offered product is equipped with a GPON port of SC/UPC class B+. The device uses a tower type standing casing. The set includes a 12 V 2 A power supply.

SFP BIDI 10G TO 20KM LC DDM OPTICODE

Q SFP 40G 40KM OPTI-CODE

PLC optical splitter 1x4, in box SPLITER BOX (slot box/module box), equipped with 4 SC / APC connectors and 4 SC / APC adapters on the front panel, outputs in equal ratio, dimensions: 128x110.9x24mm

PLC splitters are made by depositing a waveguide layer (silicon dioxide) on a silicon substrate, then a ribbon fiber is welded to the resulting chip. Thereby to this technology, they can combine heat resistance, miniature size and a wide operating wavelength r...

PLC splitters are made by depositing a waveguide layer (silicon dioxide) on a silicon substrate, then a ribbon fiber is welded to the resulting chip. Thereby to this technology, they can combine heat resistance, miniature size and a wide operating wavelength range.
Planar PLC splitter PLC-108-A-NC-9-NC-15 type 1*8 has one input cable with no connector and eight output cables with no connectors as well.
The body of this PLC splitter is a metal tube. Tube size is 60*7*4 mm.

GLC-SX-MMD features a 1000BASE-SX interface, allowing for data transmission at a rate of 1 Gigabit per second. It operates on multi-mode fiber and supports OPTI-CODE

Ftth SC APC 1X32 Plc Singlemode Fiber Optical Splitter Fbt Optical Coupler 1. Adopt carrier-grade standards and have strong stability 2. Evenly splitting: distribute the fiber network signal evenly to each line. 3. Low insertion loss: Loss is not sensitive to...

Ftth SC APC 1X32 Plc Singlemode Fiber Optical Splitter Fbt Optical Coupler

1. Adopt carrier-grade standards and have strong stability
2. Evenly splitting: distribute the fiber network signal evenly to each line.
3. Low insertion loss: Loss is not sensitive to the wavelength of light and can meet the transmission requirements of different wavelengths.

Product model: SC/1-32
Product function: optical signal coupling, branching and distribution
Working wavelength: 1310/1550nm
Working temperature: -40 ° C ~ 85 ° C
Number of interfaces: 1+32
Interface model: SC-SC

A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light s...

A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines.

By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. FS supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapters.

≤0.5dB(Typical) Low Insertion Loss
Zirconia Ceramic Sleeve with High-precision Alignment
Protective Dust Cap Keeps Adapter’s Interior Clean from Dust
Stainless Steel Clips for Tool-less Snap-in Installation
Available in A Variety of Connector Types

Ftth SC APC 1X4 Plc Singlemode Fiber Optical Splitter Fbt Optical Coupler 1. Adopt carrier-grade standards and have strong stability 2. Evenly splitting: distribute the fiber network signal evenly to each line. 3. Low insertion loss: Loss is not sensitive to...

Ftth SC APC 1X4 Plc Singlemode Fiber Optical Splitter Fbt Optical Coupler


1. Adopt carrier-grade standards and have strong stability
2. Evenly splitting: distribute the fiber network signal evenly to each line.
3. Low insertion loss: Loss is not sensitive to the wavelength of light and can meet the transmission requirements of different wavelengths.

Product model: SC/1-4
Product function: optical signal coupling, branching and distribution
Working wavelength: 1310/1550nm
Working temperature: -40 ° C ~ 85 ° C
Number of interfaces: 1+4
Interface model: SC-SC
Line length: 3m
Color: Green + yellow

Ftth SC UPC 1X8 Plc Singlemode Fiber Optical Splitter Fbt Optical Coupler 1. Adopt carrier-grade standards and have strong stability 2. Evenly splitting: distribute the fiber network signal evenly to each line. 3. Low insertion loss: Loss is not sensitive to ...

Ftth SC UPC 1X8 Plc Singlemode Fiber Optical Splitter Fbt Optical Coupler

1. Adopt carrier-grade standards and have strong stability
2. Evenly splitting: distribute the fiber network signal evenly to each line.
3. Low insertion loss: Loss is not sensitive to the wavelength of light and can meet the transmission requirements of different wavelengths.

Product model: SC/1-8
Product function: optical signal coupling, branching and distribution
Working wavelength: 1310/1550nm
Working temperature: -40 ° C ~ 85 ° C
Number of interfaces: 1+2
Interface model: SC-SC
Line length: 3m
Color: blue + yellow

48 core fiber optic cable splice closure outdoor fiber cable joint box

16 Core Fiber Distribution Box FDB-16C-A / Fiber access terminal box (FAT) / optical termination box (OTB) / Fiber termination box (FTB) / Optical Distribution box (ODB) are a compact fiber management box used for FTTH application. is widely used in FTTx cabling for both fiber cabling and cable management.

Los dispositivos terminales V2802RGW están diseñados para satisfacer la demanda de servicios FTTH y triple play de operadores de redes fijas u operadores de cable. Estas cajas se basan en la tecnología Gigabit GPON madura, que tiene una alta relación entre ren...

Los dispositivos terminales V2802RGW están diseñados para satisfacer la demanda de servicios FTTH y triple play de operadores de redes fijas u operadores de cable. Estas cajas se basan en la tecnología Gigabit GPON madura, que tiene una alta relación entre rendimiento y precio, y la tecnología 802.11n WiFi (2T2R), Capa 2/3. Son altamente confiables y fáciles de mantener

Wall-mount cabinet secures and organizes 15U of 19-inch rack equipment in network closets, classrooms and other locations with limited floor space. Houses network switches and patch panels up to 20.5 inches deep.

DAC-QSFP-40G-3M - Dell EMC Compatible - 3m 40G QSFP+ Passive Direct Attach Copper Cable